Parameters |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
16 |
Weight |
141.690917mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Subcategory |
FF/Latches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
MILITARY |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Current - Output |
4mA |
Number of Bits |
8 |
Propagation Delay |
39 ns |
Turn On Delay Time |
16 ns |
Family |
HCT |
Logic Function |
D-Type |
Logic IC Type |
D LATCH |
Max I(ol) |
0.004 A |
Prop. Delay@Nom-Sup |
59 ns |
Trigger Type |
LOW LEVEL |
High Level Output Current |
-4mA |
Low Level Output Current |
4mA |
Number of Output Lines |
8 |
Height |
1.58mm |
Length |
9.9mm |
Width |
3.91mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
CD74HCT259M96G4 Overview
The SOIC package contains it. As a result, it has a packaging of Tape and Reel. 8 Bits are used in the design of this electronic part. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to function, the supply voltage should be set to 5V. 16 pins are provided. It is part of the family of electronic devices called HCT. There are 16 pins on it. It is mounted according to the Surface Mount method. This part can be found within the FF/Latches subcategory. 5V power supplies are needed to operate it. A high level of efficiency is achieved by maintaining the supply voltage at 5V. Input lines are converted into binary equivalents by 8 output lines. In total, it has 1 elements. It has been set to 4mA for the low level output current. -4mA is set as the high level output current. It is recommended to work at a temperature lower than 125°C. In order for the system to operate properly, the operating temperature should be higher than -55°C. 5.5V is the maximum voltage it supports. The minimal voltage for operation is 4.5V. There is a logic IC D LATCH used in the system. With an output current of 4mA, it is highly flexible in terms of design.
CD74HCT259M96G4 Features
SOIC package
8 Bits
16 pin count
16 pins
5V power supplies
1 elements
CD74HCT259M96G4 Applications
There are a lot of Texas Instruments CD74HCT259M96G4 Latches applications.
- Watches
- Shift left register
- Data acquisition
- High-speed logic
- Buffer Storage
- Up-Down Johnson
- Frequency
- Shift left with parallel loading
- Counter
- Serial Output Register