CD74HCT273E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Number of Bits | 8 |
| Clock Frequency | 50MHz |
| Propagation Delay | 48 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 12 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 45 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT273E Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. As part of the package Tube, it is embedded. T flip flop uses Non-Invertedas the output. It is configured with a trigger that uses Positive Edge. Through Holeis in the way of this electric part. The JK flip flop operates at 4.5V~5.5Vvolts. It is operating at -55°C~125°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74HCT series. You should not exceed 50MHzin its output frequency. The element count is 1 . In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. JK flip flop belongs to 74HCT273 family. The D flip flop is powered by a voltage of 5V . Its input capacitance is 10pFfarads. Electronic devices of this type belong to the HCTfamily. In this case, the electronic component is mounted in the way of Through Hole. The 20pins are designed into the board. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. This flip flop is designed with 8 Bits. In order for the device to operate, it requires 5V power supplies. High efficiency requires the supply voltage to be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 4mA. As a result, it consumes 8μA of quiescent current without being affected by external factors. There are 8 channels available.
CD74HCT273E Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
CD74HCT273E Applications
There are a lot of Texas Instruments CD74HCT273E Flip Flops applications.
- Counters
- High Performance Logic for test systems
- Control circuits
- Guaranteed simultaneous switching noise level
- Registers
- Data storage
- Reduced system switching noise
- ESD performance
- Count Modes
- Divide a clock signal by 2 or 4
