CD74HCT273M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Number of Bits | 8 |
| Clock Frequency | 50MHz |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 12 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 45 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT273M Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. There is an embedded version in the package Tube. This output is configured with Non-Inverted. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. In the operating environment, the temperature is -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. It should not exceed 50MHzin terms of its output frequency. There are 1 elements in it. There is a consumption of 8μAof quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74HCT273 family contains this object. A voltage of 5V is used as the power supply for this D latch. A JK flip flop with a 10pFfarad input capacitance is used here. This D flip flop belongs to the family of HCT. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 8bits. There are 5V power supplies attached to it. High efficiency requires the supply voltage to be maintained at 5V. Featuring the maximum design flexibility, it has an output current of 4mA . There are 8 output lines in this JK flip flop. There are 8 channels available.
CD74HCT273M Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
CD74HCT273M Applications
There are a lot of Texas Instruments CD74HCT273M Flip Flops applications.
- Synchronous counter
- Cold spare funcion
- Individual Asynchronous Resets
- Data transfer
- ATE
- 2 – Bit synchronous counter
- Data storage
- Frequency division
- Automotive
- Shift registers
