CD74HCT273M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 50MHz |
| Propagation Delay | 30 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 12 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 45 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT273M96 Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). It is contained within the Cut Tape (CT)package. This output is configured with Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In this case, the operating temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. The 74HCTseries comprises this type of FPGA. There should be no greater frequency than 50MHzon its output. In total, it contains 1 elements. There have been 20 terminations. This D latch belongs to the family of 74HCT273. The D flip flop is powered by a voltage of 5V . A JK flip flop with a 10pFfarad input capacitance is used here. Devices in the HCTfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. 8bits are used in its design. Its flexibility is enhanced by 8 circuits. This D flip flop is well suited for TR based on its reliable performance. It runs on 5Vvolts of power. For high efficiency, the supply voltage should be set to 5V. It consumes a total of 8μA quiescent current at any given time.
CD74HCT273M96 Features
Cut Tape (CT) package
74HCT series
20 pins
8 Bits
5V power supplies
CD74HCT273M96 Applications
There are a lot of Texas Instruments CD74HCT273M96 Flip Flops applications.
- Asynchronous counter
- Pattern generators
- Buffered Clock
- Consumer
- Bus hold
- Single Up Count-Control Line
- 2 – Bit synchronous counter
- Memory
- Individual Asynchronous Resets
- Cold spare funcion
