Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Contact Plating |
Gold |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Weight |
1.1991g |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Series |
74HCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
Multiplexer |
Additional Feature |
TRANSPARENT ADDRESS LATCHES; REGISTERED DATA INPUTS |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT APPLICABLE |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
NOT APPLICABLE |
Base Part Number |
74HCT356 |
Pin Count |
20 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Circuit |
1 x 8:1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Load Capacitance |
50pF |
Power Dissipation |
600mW |
Number of Bits |
8 |
Propagation Delay |
51 ns |
Family |
HCT |
Number of Inputs |
8 |
Output Characteristics |
3-STATE |
Current - Output High, Low |
4mA 4mA |
Supply Type |
Single |
Bandwidth |
28MHz |
Max I(ol) |
0.004 A |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height |
5.08mm |
Length |
24.33mm |
Width |
6.35mm |
Thickness |
4.57mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HCT356E Overview
As a means of saving space, digital switch is provided in the 20-DIP (0.300, 7.62mm).It is packaged in the way of Tube.As far as mounting is concerned, digital switch ic uses Through Hole.Multiplexer is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers of the 74HCT series can be used in a wide range of applications.As part of its basic configuration, 20 terminations are designed as a part of it.As its base part number is 74HCT356, logic switch can also be used to find its related parts.The multiplexer is supplied with 5V voltage.Currently, this turn signal switch has a total of 20 component pins.Its supply type is Single, which is used as the source of power.The board is configured with 20 pins.The mounting is in the way of Through Hole.In the HCT family, the logic switch is included.There are 8 bits signal multiplexer provides.The minimal supply voltage (Vsup) should be kept at 4.5V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.There are 1 outputs designed to operate the turn signal switch.In this multiplexer, there is a total of 8 inputs.Additionally, TRANSPARENT ADDRESS LATCHES; REGISTERED DATA INPUTS has improved characteristics.
CD74HCT356E Features
Supplied in the 20-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
TRANSPARENT ADDRESS LATCHES; REGISTERED DATA INPUTS
CD74HCT356E Applications
There are a lot of Texas Instruments CD74HCT356E Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Injectors
- Data bus control
- Computer memory
- High-performance memory-decoding applications
- A robotic vehicle with the metal detector
- Speed synchronization of multiple motors in industries
- Combinational circuit
- HDMI applications
- A/D converters