CD74HCT356M96G4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Multiplexer |
| Additional Feature | TRANSPARENT ADDRESS LATCHES; REGISTERED DATA INPUTS |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT356 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 51 ns |
| Family | HCT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 77 ns |
| Number of Input Lines | 8 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
CD74HCT356M96G4 Overview
In order to save board space, digital switch is located in the 20-SOIC (0.295, 7.50mm Width).It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the Surface Mount method .For the analog part of the multiplexers, an IC Multiplexer is used.The operating temperature of -55°C~125°C will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 74HCT series, the multiplexers can be used for a wide range of applications.The basic configuration includes 20 terminations.The part number for 74HCT356 can be used to find its logic switch related parts as well.The voltage supplied for multiplexer's system is 5V.multiplexer's systemCurrently, this turn signal switch has a total of 20 component pins.GULL WING represents the end of conductors.The supply type of this multiplexer ic is Single.Currently, it is configured with 20 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of HCT.It is recommended that the minimum supply voltage (Vsup) be kept at 4.5V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.There is a power supply provided for the mux switch's normal operation of 5V.The turn signal switch operates with 1 outputs.The signal switching is packaged by TAPE AND REEL. It is possible to accept voltage levels through 8 input lines of multiplexers.In addition, it provides improved features of TRANSPARENT ADDRESS LATCHES; REGISTERED DATA INPUTS.
CD74HCT356M96G4 Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
8 input lines
TRANSPARENT ADDRESS LATCHES; REGISTERED DATA INPUTS
CD74HCT356M96G4 Applications
There are a lot of Texas Instruments CD74HCT356M96G4 Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- Data demultiplexing
- High-performance memory-decoding applications
- Seven segment displays
- GLAN
- Audio transmission
- Medium scale TV wall
- Signal router
- Idle motor
- Memory system of computers
