CD74HCT367MG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | ONE FUNCTION WITH TWO BITS |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT367 |
| Pin Count | 16 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 25 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 53 ns |
| Family | HCT |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 2, 4 (Hex) |
| Prop. Delay@Nom-Sup | 38 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 6 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT367MG4 Overview
Logical driver uses a neat 16-SOIC (0.154, 3.90mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -55°C~125°C TA. The high and low logic state output current of logical driver is 4mA 4mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74HCT series devices. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. In the HCT family, the electric component belongs. 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. Enhanced with 2 ports. The bus transceiver employs 2, 4 (Hex) bits for each element. You can search "74HCT367" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 8μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features ONE FUNCTION WITH TWO BITS to better serve the need. Because of its 6 lines level input capability, buffer IC is more cost-effective on transimitting signals.
CD74HCT367MG4 Features
Bus Driver/Transceivers
ONE FUNCTION WITH TWO BITS
CD74HCT367MG4 Applications
There are a lot of Texas Instruments CD74HCT367MG4 Buffers & Transceivers applications.
- SONET/SDH Network
- VoIP phones
- Wireless 3D game
- Wireless communication
- Transmission stations
- Changeing the frequency from IF to RF
- Wireless access points
- Point-to-point networking
- Metro access rings
- Thermal management
