CD74HCT373E
| Parameters | |
|---|---|
| Propagation Delay | 32 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 35 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Control Type | ENABLE LOW |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
CD74HCT373E Overview
Package 20-DIP (0.300, 7.62mm) includes it. Packaged in the way of Tube. It uses Tri-State as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Through Hole, this electronic part is mounted. It operates with a supply voltage of 4.5V~5.5V. During operation, the temperature is set at -55°C~125°C. The 74HCT series of FPGAs is the one this FPGA belongs to. The design of this electronic part contains 8 bits. As far as this device is concerned, it has no terminations. The family it belongs to is 74HCT373. With the supply voltage set at 5V, it is able to operate. 20 pins are available on it. In terms of electronic devices, this one is in the HCT family. It is designed with 20 pins. Through Hole is the way in which this electronic part is mounted. In this device, there is a total of 2 ports available for use. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are needed to run it. Its output current of 6mA ensures maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. 3 output lines provide binary equivalents of input lines. Aquiescent current is consumed by 8μA without being affected by external forces. 8 circuits are used to provide this superior level of flexibility.
CD74HCT373E Features
20-DIP (0.300, 7.62mm) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
CD74HCT373E Applications
There are a lot of Texas Instruments CD74HCT373E Latches applications.
- Sample and hold register
- Ring counter
- Automotive Body Electronics
- Flip-flops
- Communication systems
- Multistage ripple counting
- Automatic test equipment
- Counter control
- Parallel data synchronization
- Avionics
