CD74HCT373M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Max Supply Current | 8μA |
| Number of Bits | 8 |
| Propagation Delay | 32 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 35 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Control Type | ENABLE LOW |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT373M Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. Tube is the way in which it is packaged. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Surface Mount. There is no supply voltage for this device. The temperature at which the machine is operating is -55°C~125°C. The 74HCT series contains FPGAs of this type. The design of this electronic part contains 8 bits. This device has been designed with 20 terminations available. The family in which it belongs to is 74HCT373. With the supply voltage set at 5V, it is able to operate. 20 pins are available on it. It is a member of the HCT family of electronic devices. With the design of the board, there are only 20 pins. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. There are 5V power supplies attached to it. With 6mA, maximum design flexibility is ensured. High efficiency requires a supply voltage of 5V. The binary equivalent of the input line is generated by 3 output lines. The quiescent current consumed by it is 8μA because it is unaffected by external factors. The circuit's superior flexibility is achieved through the use of 8 circuits.
CD74HCT373M Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
CD74HCT373M Applications
There are a lot of Texas Instruments CD74HCT373M Latches applications.
- Address register
- Pattern generators
- General-Purpose Register
- Up-Down Johnson
- Counter control
- Parallel Output
- Multistage ripple counting
- Ring counter
- Pattern Generators
- Parallel Input
