CD74HCT373M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 53 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 35 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Control Type | ENABLE LOW |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT373M96 Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. It is packaged in the way of Tape & Reel (TR). There is a Tri-State output configured. D-Type Transparent Latch is the logic type of this electrical device. Electronic components are mounted using the Surface Mount method. There is no supply voltage for this device. A temperature of -55°C~125°C is set as the operating temperature. The 74HCT series of FPGAs is the one this FPGA belongs to. This electronic part is designed with 8 Bits. In this device, there are 20 terminations that have been designed. The family it belongs to is 74HCT373. The device is operated when the supply voltage is set to 5V. There are 20 pins attached to it. In terms of electronic devices, this one is in the HCT family. In addition, it is designed with a pin number of 20. Surface Mount is used to mount this electronic part. This device has 2 ports. The part belongs to the Bus Driver/Transceiver subcategory. A total of 5V power supplies are needed to run it. Based on its reliable performance, this device is well suited to TR. The output current of 6mA makes it feature maximum design flexibility. High efficiency requires a supply voltage of 5V. Input lines are converted into binary equivalents by 8 output lines. The current consumed by the device is 8μA volts in quiescent mode, which cannot be affected by external factors. A total of 1 elements make up this object.
CD74HCT373M96 Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
1 elements
CD74HCT373M96 Applications
There are a lot of Texas Instruments CD74HCT373M96 Latches applications.
- Relay replacement
- Sample and hold register
- A/D and D/A conversion
- A/D converters
- Display
- Registers
- Shift right with parallel loading
- High-speed logic
- Automotive Infotainment
- Address register
