banner_page

CD74HCT373M96G4

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74HCT373M96G4
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 508
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Series 74HCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory Bus Driver/Transceiver
Packing Method TR
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74HCT373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 6mA
Number of Bits 8
Propagation Delay 32 ns
Quiescent Current 8μA
Turn On Delay Time 35 ns
Family HCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 6mA 6mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.006 A
Control Type ENABLE LOW
Number of Output Lines 8
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74HCT373M96G4 Overview


20-SOIC (0.295, 7.50mm Width) contains it. As a result, it has a packaging of Tape & Reel (TR). Tri-State is the output configured for it. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. During operation, the temperature is set at -55°C~125°C. In the 74HCT series, this FPGA is located. There are 8 bits in this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to 74HCT373 family. In order to operate it, the supply voltage must be 5V. There are 20 pins on it. In the world of electronics, this electronic device belongs to the family of HCT. The 20 pins are designed into it. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. This part can be found within the Bus Driver/Transceiver subcategory. A total of 5V power supplies are required for it to operate. Based on its reliable performance, this device is appropriate for TR. It features maximum flexibility in design due to 6mA output current. If you want to achieve high efficiency, make sure the supply voltage is at 5V. 8 output lines generate the binary equivalent of the input lines. The quiescent current consumed by it is 8μA because it is unaffected by external factors. This element consists of 1.

CD74HCT373M96G4 Features


20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
1 elements

CD74HCT373M96G4 Applications


There are a lot of Texas Instruments CD74HCT373M96G4 Latches applications.

  • Parallel data storage
  • Multi-line decoders
  • Buffer register
  • Display driver
  • Network Switches
  • Shift Registers
  • Avionics
  • Shift right with parallel loading
  • Phase comparator
  • Relay

Write a review

Note: HTML is not translated!
    Bad           Good