Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Series |
74HCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Subcategory |
Bus Driver/Transceiver |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74HCT373 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
6mA |
Number of Bits |
8 |
Propagation Delay |
32 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
35 ns |
Family |
HCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
6mA 6mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.006 A |
Control Type |
ENABLE LOW |
Number of Output Lines |
8 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HCT373MG4 Overview
20-SOIC (0.295, 7.50mm Width) contains it. Tube is the packaging method. The output it is configured with uses Tri-State. There is D-Type Transparent Latch logic type for this electrical device. According to Surface Mount, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. The temperature at which the machine is operating is -55°C~125°C. The 74HCT series contains FPGAs of this type. Electronic parts with 8 bits are designed for this application. This device has 20 terminations. As a member of the 74HCT373 family, it falls under that category. A 5V voltage supply is required for operation. The 20 pind are equipped with it. HCT is the family of this electronic device. This board has 20 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. The part belongs to the Bus Driver/Transceiver subcategory. The system is powered by 5V sources. With an output current of 6mA, it is highly flexible in terms of design. Optimal efficiency requires 5V as the supply voltage. A binary equivalent of the input line is generated by the 8 output lines. As far as external factors are concerned, it consumes 8μA of quiescent current without getting affected by them. In total, it has 1 elements.
CD74HCT373MG4 Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
1 elements
CD74HCT373MG4 Applications
There are a lot of Texas Instruments CD74HCT373MG4 Latches applications.
- Relay replacement
- Registers
- Double bus register system
- Shift left register
- Frequency
- Motor Drives
- Accumulator Registers
- BCD counting
- Four-bit storage with output enable
- Buffer register