CD74HCT374M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 60MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 50 ns |
| RoHS Status | Non-RoHS Compliant |
CD74HCT374M Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). As part of the package Tube, it is embedded. T flip flop uses Tri-State, Non-Invertedas its output configuration. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is operating at a temperature of -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74HCT series. A frequency of 60MHzshould not be exceeded by its output. In total, there are 1 elements. It consumes 8μA of quiescent A total of 20terminations have been recorded. It is powered from a supply voltage of 5V. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the HCTfamily are electronic devices. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be maintained above 4.5V for normal operation. The D flip flop has no ports embedded.
CD74HCT374M Features
Tube package
74HCT series
CD74HCT374M Applications
There are a lot of Rochester Electronics, LLC CD74HCT374M Flip Flops applications.
- Cold spare funcion
- High Performance Logic for test systems
- Single Up Count-Control Line
- Digital electronics systems
- Communications
- Synchronous counter
- Control circuits
- CMOS Process
- Storage Registers
- Memory
