CD74HCT377EG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74HCT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 50MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 38ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
CD74HCT377EG4 Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. Package Tubeembeds it. As configured, the output uses Non-Inverted. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. Its output frequency should not exceed 50MHz Hz. A total of 1elements are present in it. As a result, it consumes 8μA quiescent current. If you search by 74HCT377, you will find similar parts. Input capacitance of this device is 10pF farads.
CD74HCT377EG4 Features
Tube package
74HCT series
CD74HCT377EG4 Applications
There are a lot of Texas Instruments CD74HCT377EG4 Flip Flops applications.
- Pattern generators
- Matched Rise and Fall
- Buffered Clock
- Balanced Propagation Delays
- Communications
- Power down protection
- Divide a clock signal by 2 or 4
- Data storage
- Single Up Count-Control Line
- Frequency division
