CD74HCT377M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 50MHz |
| Propagation Delay | 38 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 16 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 38ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 57 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT377M96 Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. Package Tape & Reel (TR)embeds it. There is a Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. Temperature is set to -55°C~125°C TA. D-Typeis the type of this D latch. JK flip flop is a part of the 74HCTseries of FPGAs. A frequency of 50MHzshould be the maximum output frequency. The list contains 1 elements. There have been 20 terminations. This D latch belongs to the family of 74HCT377. It is powered by a voltage of 5V . A JK flip flop with a 10pFfarad input capacitance is used here. It is a member of the HCTfamily of D flip flop. It is mounted in the way of Surface Mount. The 20pins are designed into the board. Its clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latch. An electronic part designed with 8bits is used in this application. In order to achieve its superior flexibility, 8 circuits are used. In light of its reliable performance, this T flip flop is well suited for TR. It operates from 5V power supplies. Optimal efficiency requires a supply voltage of 5V. There are 3 output lines on it. 8μAquiescent current consumed. It is also characterized by WITH HOLD MODE.
CD74HCT377M96 Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
CD74HCT377M96 Applications
There are a lot of Texas Instruments CD74HCT377M96 Flip Flops applications.
- Common Clocks
- Differential Individual
- Clock pulse
- Instrumentation
- Load Control
- Digital electronics systems
- Individual Asynchronous Resets
- Buffered Clock
- Memory
- Safety Clamp
