CD74HCT377ME4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 50MHz |
| Propagation Delay | 38 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 16 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 38ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 57 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT377ME4 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). Package Tubeembeds it. As configured, the output uses Non-Inverted. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. It is at -55°C~125°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74HCT series. There should be no greater frequency than 50MHzon its output. The list contains 1 elements. A total of 20 terminations have been made. It is a member of the 74HCT377 family. The power supply voltage is 5V. JK flip flop input capacitance is 10pF farads. The electronic device belongs to the HCTfamily. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The design is based on 8bits. 8 circuits are used to achieve its superior flexibility. The power supply is 5V. In order to achieve high efficiency, the supply voltage should be maintained at 5V. It operates with 3 output lines. 8μAquiescent current consumed. There is also a characteristic of WITH HOLD MODE.
CD74HCT377ME4 Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
CD74HCT377ME4 Applications
There are a lot of Texas Instruments CD74HCT377ME4 Flip Flops applications.
- Synchronous counter
- Storage registers
- Storage Registers
- Guaranteed simultaneous switching noise level
- Balanced 24 mA output drivers
- Digital electronics systems
- Frequency Divider circuits
- Data storage
- Latch-up performance
- Registers
