CD74HCT393M96
| Parameters | |
|---|---|
| Frequency | 27MHz |
| Base Part Number | 74HCT393 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 93 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 93 ns |
| Reset | Asynchronous |
| Family | HCT |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 78 ns |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 18 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
CD74HCT393M96 Overview
This device is supplied in the 14-SOIC (0.154, 3.90mm Width) package. 14 terminations are used for its configuration. 5Vis enabled to operate in an extremely flexible manner due to its supply voltage. 2 elements are interconnected in wires. In total, there are 14pins on the component. Cut Tape (CT)is the packaging method used for this package. There are 14 pins going on to connect other parts in the circuit. To mount it, use the method of [0]. Initially, it appears to belong to the HCT family. Due to the fact that it is a member of the 74HCTseries, it has a wide range of applications. A logic type of Binary Counter is adopted. Ideally, the operating temperature should be set to -55°C~125°C. Mounting type Surface Mountis used. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. There are 4bits stored in each element of the array. Based on the Pbfree code, the result may be yes. Among its base part number [0], you will find additional parts that are related. It is packed with [0]. In this case, there is 5V voltage coming from the voltage source. To operate, it requires a supply voltage of 5V volts. It operates at a frequency of 27MHz Hz. It consumes quiescent current at 8μA.
CD74HCT393M96 Features
Embedded in the 14-SOIC (0.154, 3.90mm Width) package
4 bits per element
Operating supply voltage of 5V
Frequency of 27MHz
CD74HCT393M96 Applications
There are a lot of Texas Instruments CD74HCT393M96 Counters & Dividers applications.
- Frequency dividing circuits
- Signal gating
- Timers
- VHF, UHF, FM, AM, etc.
- Control counters
- Timing applications
- Dual Up Counters
- Clocks
- DIVISION
- SQUARING
