CD74HCT393MT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT393 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 93 ns |
| Quiescent Current | 8μA |
| Reset | Asynchronous |
| Family | HCT |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 78 ns |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 18 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 27MHz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT393MT Overview
This device is supplied in the 14-SOIC (0.154, 3.90mm Width) package. This configuration uses 14terminations. Having a voltage supply of 5Vallows it to operate in a highly flexible manner. In this diagram, there are 2elements that are interconnected by wires. The total number of component pins is 14. Tape & Reel (TR)is used to package it. A circuit is connected to other components by 14pins. The Surface Mountway is used to mount it. It is a member of the family [0]. Due to its membership in the 74HCTseries, it is suitable for a variety of applications. It is decided to use the logic type [0]. It is recommended to set the operating temperature to -55°C~125°C. The mounting type is Surface Mount. When the supply voltage is set to [0], it is able to operate with greater reliability. There are 4bits stored in each element of the array. It is possible for the result to be yesin Pbfree code. It should be noted that there are more related parts under the 74HCT393base part number. Its packaging is provided by [0]. From the voltage source, there is a voltage of 5V volts. The device operates on a supply voltage of [0]. It operates at a frequency of 30MHz Hz. It consumes quiescent current at 8μA.
CD74HCT393MT Features
Embedded in the 14-SOIC (0.154, 3.90mm Width) package
4 bits per element
Operating supply voltage of 5V
Frequency of 30MHz
CD74HCT393MT Applications
There are a lot of Texas Instruments CD74HCT393MT Counters & Dividers applications.
- Fixed and programmable counters greater than 10
- Programmable binary and decade
- Digital multiplexing and demultiplexing
- counting/frequency sy nthesizers-BCD output
- VHF, UHF, FM, AM, etc.
- Timing applications
- Binary counter/decoder
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Time delay circuits
- Time-delay circuits
