CD74HCT40103M96G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | TCO OUTPUT; RESET TO MAX COUNT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Base Part Number | 74HCT40103 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 102 ns |
| Quiescent Current | 8μA |
| Reset | Asynchronous |
| Family | HCT |
| Logic Function | Counter |
| Direction | Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| fmax-Min | 9 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 14MHz |
| Timing | Synchronous |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT40103M96G4 Overview
This is a device supplied in the 16-SOIC (0.154, 3.90mm Width) package. The configuration of this device is based on 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. The 1elements are connected by wires. 16is the number of pins on all components. It is packaged in a manner consistent with Tape & Reel (TR). There are 16 pins going on to connect other parts in the circuit. The Surface Mountway is used to mount it. The HCTfamily is derived from it. This device is a member of the 74HCTseries and is well suited for a wide range of applications. It is decided to use the logic type [0]. In this case, the operating temperature should be set to -55°C~125°C. There is a mounting type of Surface Mounton this device. Providing a voltage of 4.5V~5.5Vensures higher reliability of operation. The array contains elements that store 8bits each. It is possible for the result to be yesin Pbfree code. A major feature of this electronic device is its [0]. The base part number of 74HCT40103provides access to more related parts. The packing of this product is performed by [0]. In this case, there is 5V voltage coming from the voltage source. The device operates on a supply voltage of [0]. It operates with the frequency of 25MHz. In the quiescent state, it consumes 8μA current.
CD74HCT40103M96G4 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
TCO OUTPUT; RESET TO MAX COUNT
Operating supply voltage of 5V
Frequency of 25MHz
CD74HCT40103M96G4 Applications
There are a lot of Texas Instruments CD74HCT40103M96G4 Counters & Dividers applications.
- Digital multiplexing and demultiplexing
- counting/frequency sy nthesizers-BCD output
- Dual Up Counters
- POWER COMPUTATION
- Timers
- Up Counters
- Control counters
- SQUARING
- Fixed and programmable counters greater than 10
- LINEARIZATION
