CD74HCT4051E

130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4051 16 Pins 400nA 4.5V 16-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HCT4051E
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 236
Description: 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4051 16 Pins 400nA 4.5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	951.693491mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	180Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Number of Functions	1
Supply Voltage	4.5V
Terminal Pitch	2.54mm
Base Part Number	74HCT4051
Pin Count	16
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	16μA
Propagation Delay	12 ns
Turn On Delay Time	55 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	45 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	400nA
Channel Capacitance (CS(off), CD(off))	5pF 25pF
On-state Resistance Match-Nom	5Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	39ns
Switch-off Time-Max	32ns
Normal Position	NC
Signal Current-Max	0.025A
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HCT4051E Overview

Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). High reliability is ensured by the advanced packaging method Tube. It is mounted in the position Through Hole. Multiplexers and demultiplexers have a ratio of 8:1. Operating temperature around -55°C~125°C TA extended. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 16 series. The multiplexer consists of 1 circuits. Try searching for the analog switch ic with 74HCT4051 if you are looking for variants. Analog switches have 180Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analog switch ics with Dual, Single supply type are cost-effective. A low voltage of 4.5V should be applied to the electronic component. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. When using dual power supplies, you should attach at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. Operating voltages of 5V are compatible with the electrical part. A 8 input needs to be operated. In 180MHz-bandwidths, data can be transferred.