banner_page

CD74HCT4051M96

130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4051 16 Pins 400nA 4.5V 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74HCT4051M96
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 604
  • Description: 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4051 16 Pins 400nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature -55°C~125°C TA
Packaging Cut Tape (CT)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 130Ohm
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 4.5V
Base Part Number 74HCT4051
Pin Count 16
Operating Supply Voltage 5V
Polarity Non-Inverting
Number of Channels 1
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Analog IC - Other Type SINGLE-ENDED MULTIPLEXER
Operating Supply Current 160μA
Nominal Supply Current 16μA
Propagation Delay 4 ns
Turn On Delay Time 49 ns
Logic Function Demultiplexer, Multiplexer
Number of Inputs 8
Voltage - Supply, Single/Dual (±) 4.5V~5.5V ±1V~5V
Supply Type Dual, Single
Bandwidth 180MHz
Neg Supply Voltage-Nom (Vsup) -4.5V
Turn-Off Delay Time 40 ns
Max Dual Supply Voltage 5V
On-State Resistance (Max) 130Ohm
Min Dual Supply Voltage 1V
High Level Output Current 25mA
Dual Supply Voltage 3V
Low Level Output Current 25mA
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 73 dB
Current - Leakage (IS(off)) (Max) 400nA
Channel Capacitance (CS(off), CD(off)) 5pF 25pF
On-state Resistance Match-Nom 5Ohm
Channel-to-Channel Matching (ΔRon) 5 Ω
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 39ns
Switch-off Time-Max 32ns
Normal Position NC
Signal Current-Max 0.025A
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74HCT4051M96 Overview


Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Cut Tape (CT) is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Operating temperature extended to -55°C~125°C TA. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 4.5V voltage supply. It is injected into the electrical part body with 16 pins. The circuits in this analogue multiplexer number 1. If you are looking for variants of the digital switch, trying search with 74HCT4051. Internally, this switch multiplexer has a resistance of 130Ohm. The functions of 16 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Dual, Single supply type digital switch with a low cost. 4.5V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 160μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. For dual power supplies, a voltage of at least 1V should be attached. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. The electrical part can be operated at 5V voltage levels. It is possible to operate 8 inputs. This switch operates within the bandwidth of 180MHz.

CD74HCT4051M96 Features


1 Channels
160μA Supply Current
Bandwidth: 180MHz

CD74HCT4051M96 Applications


There are a lot of Texas Instruments CD74HCT4051M96 Analog Switches & Multiplexers ICs applications.

  • PDH Multiplexers
  • DSLAMs
  • High reliability control systems
  • Ultrasound
  • Relay replacements
  • CSU
  • Remote wireless modules
  • New designs requiring multiplexer functions
  • Avionics test equipment
  • High-Voltage

Write a review

Note: HTML is not translated!
    Bad           Good