banner_page

CD74HCT4051ME4

130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4051 16 Pins 400nA 4.5V 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74HCT4051ME4
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 920
  • Description: 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4051 16 Pins 400nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature -55°C~125°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 130Ohm
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 4.5V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74HCT4051
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 5V
Number of Channels 1
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Analog IC - Other Type SINGLE-ENDED MULTIPLEXER
Nominal Supply Current 16μA
Propagation Delay 8 ns
Turn On Delay Time 55 ns
Logic Function Demultiplexer, Multiplexer
Number of Inputs 8
Voltage - Supply, Single/Dual (±) 4.5V~5.5V ±1V~5V
Supply Type Dual, Single
Bandwidth 180MHz
Neg Supply Voltage-Nom (Vsup) -4.5V
Turn-Off Delay Time 45 ns
Max Dual Supply Voltage 5V
On-State Resistance (Max) 130Ohm
Min Dual Supply Voltage 1V
High Level Output Current 25mA
Dual Supply Voltage 3V
Low Level Output Current 25mA
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 73 dB
Current - Leakage (IS(off)) (Max) 400nA
Channel Capacitance (CS(off), CD(off)) 5pF 25pF
On-state Resistance Match-Nom 5Ohm
Channel-to-Channel Matching (ΔRon) 5 Ω
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 39ns
Switch-off Time-Max 32ns
Normal Position NC
Signal Current-Max 0.025A
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74HCT4051ME4 Overview


The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature around -55°C~125°C TA extended. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 1 channels. When the electronic component is given a voltage of 4.5V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. A 1 circuit is present in this switch device. Try searching for 74HCT4051 variants of the analog switch ic. The internal resistance of this digital multiplexer is 130Ohm. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 5.5V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. 4.5V is the lowest voltage that should be fed to the electronic electronic part. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. If you are using dual power supplies, you should attach at least 1V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. 5V operating voltages are supported by the electronic component. There are 8 inputs to be operated. In 180MHz-bandwidths, data can be transferred.

CD74HCT4051ME4 Features


1 Channels
Bandwidth: 180MHz

CD74HCT4051ME4 Applications


There are a lot of Texas Instruments CD74HCT4051ME4 Analog Switches & Multiplexers ICs applications.

  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Industrial and process control systems
  • Routers
  • Power routing
  • Channelized and Unchannelized DS3 applications
  • Battery Powered Instruments
  • Precision test equipment
  • New designs requiring multiplexer functions
  • Low-Voltage
  • Communication systems

Write a review

Note: HTML is not translated!
    Bad           Good