Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
139.989945mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
130Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74HCT4051 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Nominal Supply Current |
16μA |
Propagation Delay |
8 ns |
Turn On Delay Time |
55 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
4.5V~5.5V ±1V~5V |
Supply Type |
Dual, Single |
Bandwidth |
180MHz |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
45 ns |
Max Dual Supply Voltage |
5V |
On-State Resistance (Max) |
130Ohm |
Min Dual Supply Voltage |
1V |
High Level Output Current |
25mA |
Dual Supply Voltage |
3V |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
400nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 25pF |
On-state Resistance Match-Nom |
5Ohm |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
39ns |
Switch-off Time-Max |
32ns |
Normal Position |
NC |
Signal Current-Max |
0.025A |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HCT4051MTG4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. 8:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -55°C~125°C TA. There are 16 terminations totally. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. 1 circuits are used in this analogue multiplexer. 74HCT4051 can be used to search for analog multiplexer variants. This digital multiplexer has 130Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 4.5V. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. A dual power supply should have at least 1V voltage attached. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. Operating voltages range from 5V. A 8 input needs to be operated. 180MHz-bandwidths can be used to transfer data between multiplexers.
CD74HCT4051MTG4 Features
1 Channels
Bandwidth: 180MHz
CD74HCT4051MTG4 Applications
There are a lot of Texas Instruments CD74HCT4051MTG4 Analog Switches & Multiplexers ICs applications.
- HDTV
- FTTH
- Channel Banks
- Routers
- Precision test equipment
- Audio and video switching
- Industrial and process control systems
- MP3 players
- Digital access cross connects
- SONET/SDH ADM