CD74HCT4051QM96Q1

130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4051 16 Pins 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HCT4051QM96Q1
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 807
Description: 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4051 16 Pins 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HCT4051
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	8μA
Nominal Supply Current	16μA
Propagation Delay	12 ns
Turn On Delay Time	55 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	45 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	75 dB
Channel Capacitance (CS(off), CD(off))	5pF 25pF
On-state Resistance Match-Nom	5Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Signal Current-Max	0.025A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold

CD74HCT4051QM96Q1 Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. There is 8:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, 16 terminations have occurred. The electronic part delivers high-quality output through its 8 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. It is injected into the electrical part body with 16 pins. A total of 1 circuits make up this switch device. Try searching with 74HCT4051 if you're looking for variants. There is 130Ohm internal resistance in this digital multiplexer. The datasheets for the 16 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 4.5V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 8μA would be sufficient for this switch device. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5.5V. A dual power supply should have at least 1V voltage attached. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. Operating voltages range from 5V. In order to operate the 8 inputs, there are several steps to follow. The transfer of data can be performed over 180MHz bandwidths. It comes from the Automotive, AEC-Q100 series.