CD74HCT4052M96G4

SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4052 16 Pins 200nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HCT4052M96G4
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 646
Description: SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4052 16 Pins 200nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HCT4052
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	16μA
Number of Bits	4
Throw Configuration	4PST
Propagation Delay	8 ns
Turn On Delay Time	70 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	185MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	5pF 12pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HCT4052M96G4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -55°C~125°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 2 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. Unlike digital switches, these are based on SP4T switching circuits. The multiplexer consists of 2 circuits. If you are looking for variants of the digital switch, trying search with 74HCT4052. This digital multiplexer has 130Ohm internal resistance. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. An effective Dual, Single supply digital multiplexer. There should be 4.5V voltage fed to the electrical part below 4.5V. Despite this switch's dual supply capability, its voltage should not exceed 5V. If you are using dual power supplies, you should attach at least 1V. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board. 5V operating voltages can be used with this electrical part. Among the inputs that can be operated are the 8 inputs. 185MHz bandwidths enable data to be transferred. The switch device is capable of conducting in a 4-bit mode.