CD74HCT4052MG4

SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4052 16 Pins 200nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HCT4052MG4
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 872
Description: SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4052 16 Pins 200nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HCT4052
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	16μA
Number of Bits	4
Throw Configuration	4PST
Propagation Delay	8 ns
Turn On Delay Time	70 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	185MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	5pF 12pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HCT4052MG4 Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 4:1. Operating temperature extended to -55°C~125°C TA. The total number of terminations is 16. This electronic part offers high-quality output due to its 2 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. This electrical component is included in the 16 series of products. Based on SP4T switching circuits, these analog multiplexers work. A 2 circuit is present in this switch device. Try searching with 74HCT4052 if you're looking for variants. The internal resistance of this digital multiplexer is 130Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. Dual, Single supply type digital switch with a low cost. 4.5V is the lowest voltage that should be fed to the electronic electronic part. For this switch, a dual supply voltage is feasible, but it must not exceed 5VWhen using dual power supplies, you should attach at least 1V. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. Operating voltages of 5V are compatible with the electrical part. Operating 8 inputs is required. There are various bandwidths available for data transfer. The switch device is capable of conducting in a 4-bit mode.