banner_page

CD74HCT4052MT

SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4052 16 Pins 200nA 4.5V 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74HCT4052MT
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 647
  • Description: SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4052 16 Pins 200nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature -55°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Termination SMD/SMT
Resistance 180Ohm
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 4.5V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74HCT4052
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 5V
Number of Channels 2
Number of Circuits 2
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Analog IC - Other Type DIFFERENTIAL MULTIPLEXER
Nominal Supply Current 16μA
Number of Bits 4
Throw Configuration 4PST
Propagation Delay 8 ns
Turn On Delay Time 70 ns
Logic Function Demultiplexer, Multiplexer
Number of Inputs 8
Voltage - Supply, Single/Dual (±) 4.5V~5.5V ±1V~5V
Supply Type Dual, Single
Bandwidth 185MHz
Neg Supply Voltage-Nom (Vsup) -4.5V
Turn-Off Delay Time 50 ns
Max Dual Supply Voltage 5V
On-State Resistance (Max) 130Ohm
Min Dual Supply Voltage 1V
High Level Output Current 25mA
Dual Supply Voltage 3V
Low Level Output Current 25mA
Multiplexer/Demultiplexer Circuit 4:1
Off-state Isolation-Nom 65 dB
Current - Leakage (IS(off)) (Max) 200nA
Channel Capacitance (CS(off), CD(off)) 5pF 12pF
On-state Resistance Match-Nom 5Ohm
Switch Circuit SP4T
Channel-to-Channel Matching (ΔRon) 5 Ω
Switching BREAK-BEFORE-MAKE
Normal Position NC
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74HCT4052MT Overview


The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Temperatures around -55°C~125°C TA are extended for operation. Total terminations are 16. A high-quality output is provided by the electrical component's 2 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. These analog multiplexers are built based on SP4T switching circuits. The circuits in this analogue multiplexer number 2. Try searching for 74HCT4052 variants of the analog switch ic. As far as internal resistance is concerned, it has 180Ohm. Datasheets for 16 pin functions are available upon request. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. There should be 4.5V voltage fed to the electrical part below 4.5V. Despite this switch device's dual supply capability, its voltage should not exceed 5V. The voltage should be at least 1V if you are using dual power supplies. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. Operating voltages range from 5V. There are 8 inputs to be operated. In 185MHz-bandwidths, data can be transferred. It can conduct in a 4-bit manner.

CD74HCT4052MT Features


2 Channels
Switch Circuit: SP4T
Bandwidth: 185MHz
4-Bit

CD74HCT4052MT Applications


There are a lot of Texas Instruments CD74HCT4052MT Analog Switches & Multiplexers ICs applications.

  • PBXs
  • Cable Telephony – NIU, Set-Top Box, Home Side Box
  • Video signal routing
  • Multi-Line E1 Interface Cards
  • High speed data transmission line cards
  • Modems
  • Medical
  • Private Branch Exchange (PBX)
  • Relay replacements
  • Public switching systems

Write a review

Note: HTML is not translated!
    Bad           Good