CD74HCT4053E

SPDT 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4053 16 Pins 100nA 4.5V 16-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HCT4053E
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 691
Description: SPDT 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4053 16 Pins 100nA 4.5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	951.693491mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Number of Functions	3
Supply Voltage	4.5V
Base Part Number	74HCT4053
Pin Count	16
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	3
Number of Circuits	3
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	16μA
Number of Bits	2
Propagation Delay	12 ns
Turn On Delay Time	48 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	44 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF 8pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

CD74HCT4053E Overview

The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 2:1. Extended operating temperature around -55°C~125°C TA. In total, there are 16 terminations. A 3 channel electronic part produces high-quality output. A 4.5V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Based on SPDT switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 3. Using the 74HCT4053 search parameter, you can discover variants of the switch. This digital multiplexer has 130Ohm internal resistance. The datasheets for the 16 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 5.5V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. When using dual power supplies, you should attach at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. This electrical part is compatible with 5V operating voltages. Operating 6 inputs is required. In 200MHz-bandwidths, data can be transferred. It can conduct in a 2-bit manner.