Parameters |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
130Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
4.5V |
Base Part Number |
74HCT4053 |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Number of Channels |
3 |
Number of Circuits |
3 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Nominal Supply Current |
16μA |
Number of Bits |
2 |
Propagation Delay |
12 ns |
Turn On Delay Time |
48 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
6 |
Voltage - Supply, Single/Dual (±) |
4.5V~5.5V ±1V~5V |
Supply Type |
Dual, Single |
Bandwidth |
200MHz |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
44 ns |
Max Dual Supply Voltage |
5V |
On-State Resistance (Max) |
130Ohm |
Min Dual Supply Voltage |
1V |
High Level Output Current |
25mA |
Dual Supply Voltage |
3V |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
64 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 8pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Circuit |
SPDT |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
CD74HCT4053M Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature extended to -55°C~125°C TA. There are 16 terminations totally. The electronic part provides high-quality output because it has 3 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. There is an electrical component included in the 16 series. Based on SPDT switching circuits, these analog multiplexers work. A 3 circuit is present in this switch device. Try searching for the analog switch ic with 74HCT4053 if you are looking for variants. It has an internal resistance of 130Ohm. For functions related to 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 5.5V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. 4.5V should be the lowest voltage fed to the electronic component. Despite this switch's dual supply capability, its voltage should not exceed 5V. A dual power supply should have at least 1V voltage attached. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. It can operate from 5V operating voltages. A 6 input needs to be operated. 200MHz bandwidths enable data to be transferred. It can conduct 2-bit signals.
CD74HCT4053M Features
3 Channels
Switch Circuit: SPDT
Bandwidth: 200MHz
2-Bit
CD74HCT4053M Applications
There are a lot of Texas Instruments CD74HCT4053M Analog Switches & Multiplexers ICs applications.
- Communication systems
- Precision data acquisition
- Data Acquisition Systems
- DSUs
- Precision test equipment
- Residential Gateways, Home Gateway/Router
- Automatic test equipment
- Routers
- Frame Relay Equipment
- Medical Instrumentation