CD74HCT4053M96

SPDT 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4053 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HCT4053M96
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 877
Description: SPDT 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4053 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	4.5V
Base Part Number	74HCT4053
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	3
Number of Circuits	3
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	16μA
Number of Bits	2
Throw Configuration	DPST
Propagation Delay	12 ns
Turn On Delay Time	48 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	44 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF 8pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HCT4053M96 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Temperatures around -55°C~125°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 3 channels. When the electronic component is given a voltage of 4.5V, it should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Based on SPDT switching circuits, these analog multiplexers work. 3 circuits are used in this analogue multiplexer. Try searching with 74HCT4053 to find analog multiplexer variants. There is 130Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage the electronic part should receive is 4.5V. Despite this switch's dual supply capability, its voltage should not exceed 5V. In the case of dual power supplies, you should connect at least 1V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. Operating voltages of 5V are compatible with the electrical part. It is possible to operate 6 inputs. 200MHz-bandwidths can be used to transfer data between multiplexers. 2-bits are supported.