CD74HCT4053M96E4

SPDT 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4053 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HCT4053M96E4
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 752
Description: SPDT 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4053 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	4.5V
Base Part Number	74HCT4053
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	3
Number of Circuits	3
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	16μA
Number of Bits	2
Throw Configuration	DPST
Propagation Delay	8 ns
Turn On Delay Time	48 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	44 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF 8pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω

CD74HCT4053M96E4 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -55°C~125°C TA. 16 terminations have been made so far. A electrical component with 3 channels is capable of high-quality output. When the electronic component is given a voltage of 4.5V, it should be turned on and run. This electrical component is included in the 16 series of products. Based on SPDT switching circuits, these analog multiplexers work. Circuits number 3 make up this analogue multiplexer. 74HCT4053 can be used to search for analog multiplexer variants. A 130Ohm internal resistance characterizes this multiplexer. Datasheets for 16 pin functions are available upon request. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 5.5V in normal situations. An effective Dual, Single supply digital multiplexer. A low voltage of 4.5V should be applied to the electronic component. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. You should attach at least 1V voltage if you are using dual power supply. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. It can operate from 5V operating voltages. It is possible to operate 6 inputs. 200MHz bandwidths enable data to be transferred. It is able to conduct in a 2-bit way.