CD74HCT4053ME4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 130Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | MILITARY |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 16μA |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 48 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 44 ns |
| Max Dual Supply Voltage | 5V |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Dual Supply Voltage | 3V |
| Low Level Output Current | 25mA |
| Off-state Isolation-Nom | 64 dB |
| On-state Resistance Match-Nom | 5Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT4053ME4 Overview
Shipping overseas is convenient due to the electrical component's packing in SOIC. This high-reliability packaging method uses advanced packaging methods Rail/Tube. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 3 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. This electronic part can be found in the 16 series. It has an internal resistance of 130Ohm. Datasheets for functions of 16 pins are available. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A cost-effective Dual, Single supply type analogue multiplexer. 4.5V is the lowest voltage the electrical component should receive. Despite this switch's dual supply capability, its voltage should not exceed 5V. In the case of dual power supplies, you should connect at least 1V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. It can operate from 5V operating voltages. It is possible to operate 6 inputs. It is not recommended to operate the switches in an environment with a temperature higher than 125°C. There are 3 outputs on the analogue multiplexer. The switch device is capable of conducting in a 2-bit mode.
CD74HCT4053ME4 Features
3 Channels
2-Bit
CD74HCT4053ME4 Applications
There are a lot of Texas Instruments CD74HCT4053ME4 Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Cross Connects
- DSUs
- Battery Powered Systems
- Medical
- Automotive applications
- Video signal routing
- Channel Banks
- PCMCIA cards
- Public switching systems
