CD74HCT4053MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 130Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Operating Supply Voltage | 5V |
| Temperature Grade | MILITARY |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 16μA |
| Number of Bits | 2 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 48 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 44 ns |
| Max Dual Supply Voltage | 5V |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Dual Supply Voltage | 3V |
| Low Level Output Current | 25mA |
| Off-state Isolation-Nom | 66 dB |
| On-state Resistance Match-Nom | 5Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT4053MG4 Overview
The electronic component is convenient to ship overseas because it is packed in a SOIC. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 2 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. A 130Ohm internal resistance characterizes this multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A analog switch ic that has a cost-effective Dual, Single supply type. The lowest voltage the electronic part should receive is 4.5V. For this switch, a dual supply voltage is feasible, but it must not exceed 5VWhen using dual power supplies, you should attach at least 1V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. 5V operating voltages are supported by the electronic component. A 6 input needs to be operated. 200MHz bandwidths enable data to be transferred. The switches should not operate in an environment where the temperature is higher than 125°C. This digital multiplexer has 3 outputs. 2-bit operation is possible.
CD74HCT4053MG4 Features
2 Channels
Bandwidth: 200MHz
2-Bit
CD74HCT4053MG4 Applications
There are a lot of Texas Instruments CD74HCT4053MG4 Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- PBXs
- Precision data acquisition
- Cable PC
- SONET/SDH ADM
- Video switching
- PBX interfaces
- Routers
- Precision instrumentation
- Frame Relay Equipment
