Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
129.387224mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Resistance |
95Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
4.5V |
Terminal Pitch |
1.27mm |
Base Part Number |
74HCT4066 |
Pin Count |
14 |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Channels |
4 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Max Supply Current |
40μA |
Throw Configuration |
SPST |
Turn On Delay Time |
30 ns |
Supply Type |
Single |
Bandwidth |
200MHz |
Turn-Off Delay Time |
45 ns |
On-State Resistance (Max) |
70Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
On-state Resistance Match-Nom |
1Ohm |
Switch Circuit |
SPST - NO |
Channel-to-Channel Matching (ΔRon) |
500m Ω |
Crosstalk |
-72dB @ 1MHz |
Switching |
MAKE-BEFORE-BREAK |
Switch-on Time-Max |
36ns |
Switch-off Time-Max |
53ns |
Voltage - Supply, Single (V+) |
4.5V~5.5V |
Drain to Source Resistance |
25Ohm |
Normal Position |
NO |
Signal Current-Max |
0.25A |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HCT4066M Overview
Shipping overseas is convenient with the electronic component packed in 14-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around -55°C~125°C TA is the extended operating temperature. There are 14 terminations totally. The electronic part delivers high-quality output through its 4 channels. When the electronic component is given a voltage of 4.5V, it should be turned on and run. This electrical component is included in the 14 series of products. The analog switch ics are built using SPST - NO switching circuits. 74HCT4066 can be used to search for analog multiplexer variants. It has an internal resistance of 95Ohm. Datasheets for 14 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Digital switch that provides Single power at a cost-effective price. 4.5V should be the lowest voltage fed to the electronic component. Analogue multiplexers require a 4.5V~5.5V voltage to drain from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 40μA. This electrical part is compatible with 5V operating voltages. It is possible to transfer data over a 200MHz-bandwidth. There is 25Ohm resistance between the Drain and Source on this part.
CD74HCT4066M Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
Drain-to-Source resistance: 25Ohm
CD74HCT4066M Applications
There are a lot of Texas Instruments CD74HCT4066M Analog Switches & Multiplexers ICs applications.
- Power routing
- Voice over IP/DSL – Integrated Access Devices, Smart
- High reliability control systems
- MP3 players
- Communications systems
- Precision test equipment
- Battery Powered Systems
- Fiber to the Home
- Data switching
- PDH Multiplexers