CD74HCT4067M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 180Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HCT4067 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 8μA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 60 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Single |
| Bandwidth | 89MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Turn-Off Delay Time | 58 ns |
| On-State Resistance (Max) | 180Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Channel Capacitance (CS(off), CD(off)) | 5pF 50pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 60ns, 55ns |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT4067M Overview
Shipping overseas is convenient with the electronic component packed in 24-SOIC (0.295, 7.50mm Width). Advanced packaging method Tube is used to provide high reliability. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Increasing operating temperature to around -55°C~125°C TA. The total number of terminations is 24. A electrical component with 1 channels is capable of high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. As part of the design of the 24 series, this electronic part has been incorporated into the system. The multiplexer consists of 1 circuits. Try searching with 74HCT4067 to find analog multiplexer variants. There is 180Ohm internal resistance in this digital multiplexer. The functions of 24 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 4.5V. A voltage of 4.5V~5.5V is required for this switch device, which drains from a single voltage source. Operating voltages of 5V are compatible with the electrical part. Operating the 16 inputs requires 16 inputs. The transfer of data can be performed over 89MHz bandwidths.
CD74HCT4067M Features
1 Channels
Bandwidth: 89MHz
CD74HCT4067M Applications
There are a lot of Texas Instruments CD74HCT4067M Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- Precision data acquisition
- Modems
- Wireless Local Loop
- PDAs
- Avionics test equipment
- Imaging
- SDH
- New designs requiring multiplexer functions
- Cable Telephony – NIU, Set-Top Box, Home Side Box
