CD74HCT4067MG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 180Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HCT4067 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 8μA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 60 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Single |
| Bandwidth | 89MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Turn-Off Delay Time | 58 ns |
| On-State Resistance (Max) | 180Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Channel Capacitance (CS(off), CD(off)) | 5pF 50pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 60ns, 55ns |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT4067MG4 Overview
As the electronic part is packed in 24-SOIC (0.295, 7.50mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Surface Mount is this multiplexer. There is 16:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C TA. A total of 24 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. As part of its design, the 24 series is equipped with this electronic component. A total of 1 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with 74HCT4067. There is 180Ohm internal resistance in this digital multiplexer. For functions related to 24 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. Using only a single voltage supply, this analog switch requires 4.5V~5.5V voltage. Operating voltages range from 5V. The electrical component supports 16 inputs. There are 89MHz bandwidths for data transfer.
CD74HCT4067MG4 Features
1 Channels
Bandwidth: 89MHz
CD74HCT4067MG4 Applications
There are a lot of Texas Instruments CD74HCT4067MG4 Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- T1/E1 Terminals
- CSU
- MP3 players
- Communication systems
- Automatic test equipment
- Wireless Local Loop
- Transmit
- Optical Applications
- SONET/SDH ADM
