CD74HCT4067QM96Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 180Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT4067 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Propagation Delay | 6 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Single |
| Bandwidth | 89MHz |
| Supply Current-Max (Isup) | 0.08mA |
| -3db Bandwidth | 89MHz |
| On-State Resistance (Max) | 180Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Channel Capacitance (CS(off), CD(off)) | 5pF 50pF |
| Switch Time (Ton, Toff) (Max) | 60ns, 55ns |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT4067QM96Q1 Overview
Due to its 24-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Operation at a temperature around -40°C~125°C TA. 24 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. 1 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with 74HCT4067 if you are looking for variants. A 180Ohm internal resistance characterizes this multiplexer. To find out what the 24 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 5.5V. Single supply type digital switch with a low cost. 4.5V is the lowest voltage that should be fed to the electronic electronic part. Analogue multiplexers require a 4.5V~5.5V voltage to drain from a single voltage supply. This electrical part is compatible with 5V operating voltages. Operating 16 inputs is required. In 89MHz-bandwidths, data can be transferred. The Automotive, AEC-Q100 series includes it.
CD74HCT4067QM96Q1 Features
1 Channels
-3db Bandwidth: 89MHz
Bandwidth: 89MHz
CD74HCT4067QM96Q1 Applications
There are a lot of Texas Instruments CD74HCT4067QM96Q1 Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Routers
- Voice over IP/DSL – Integrated Access Devices, Smart
- FTTH
- SDH/SONET multiplexers
- Imaging
- Precision data acquisition
- PBX interfaces
- Communication systems
- ISDN NT1/TA
