CD74HCT4316M96G4

37ns, 37ns SPST - NO 170Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4316 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HCT4316M96G4
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 887
Description: 37ns, 37ns SPST - NO 170Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4316 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	170Ohm
Additional Feature	ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Base Part Number	74HCT4316
Pin Count	16
Operating Supply Voltage	5V
Polarity	Non-Inverting
Power Supplies	5V
Number of Channels	4
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Max Supply Current	16μA
Throw Configuration	SPST
Turn On Delay Time	56 ns
Input Voltage (Max)	6V
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	170Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	37ns, 37ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Signal Current-Max	0.025A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HCT4316M96G4 Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operation at a temperature around -55°C~125°C TA. Totally, there are 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 4.5V voltage supply. An injection of 16 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching with 74HCT4316 if you're looking for variants. It has an internal resistance of 170Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The digital multiplexer has a low cost Dual, Single supply. In order for the electronic part to function properly, the lowest voltage should be 4.5V. A digital multiplexer may suffer damage if voltage is applied above 16μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. In the case of dual power supplies, you should connect at least 1V. Operating voltages of 5V are compatible with the electrical part. 200MHz-bandwidths can be used to transfer data between multiplexers. This electronic part has additional features, such as: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY.