CD74HCT4351E

60ns, 55ns 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4351 20 Pins 400nA 5V 20-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HCT4351E
Package: 20-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 780
Description: 60ns, 55ns 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4351 20 Pins 400nA 5V 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	20-DIP (0.300, 7.62mm)
Number of Pins	20
Weight	1.1991g
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HCT4351
Pin Count	20
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Polarity	Non-Inverting
Power Supplies	5V
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	16μA
Propagation Delay	5 ns
Turn On Delay Time	75 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Turn-Off Delay Time	65 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	185MHz
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	20mA
Dual Supply Voltage	3V
Low Level Output Current	20mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	400nA
Channel Capacitance (CS(off), CD(off))	5pF 25pF
On-state Resistance Match-Nom	10Ohm
Switch Time (Ton, Toff) (Max)	60ns, 55ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	450ns
Signal Current-Max	0.025A
Height	5.08mm
Length	24.33mm
Width	6.35mm
Thickness	4.57mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

CD74HCT4351E Overview

Shipping overseas is convenient with the electronic component packed in 20-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have a number of circuits 8:1. Extended operating temperature around -55°C~125°C TA. The total number of terminations is 20. The electronic part provides high-quality output because it has 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. A key feature of the 20 series is the inclusion of this electronic part as part of its design. There are 1 circuits in this multiplexer. Using the 74HCT4351 search parameter, you can discover variants of the switch. An switch multiplexer with 130Ohm internal resistance has a value of 130Ohm. For functions related to 20 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A analog switch ic that has a cost-effective Dual, Single supply type. 4.5V should be the lowest voltage fed to the electronic component. Despite this switch's dual supply capability, its voltage should not exceed 5V. For dual power supplies, a voltage of at least 1V should be attached. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. 5V operating voltages are supported by the electronic component. The electrical component supports 8 inputs. The data can be transferred over a wide range of bandwidths, called 180MHz bandwidths.