CD74HCT4514E
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.600, 15.24mm) |
| Number of Pins | 24 |
| Weight | 3.735305g |
| Manufacturer Package Identifier | N (R-PDIP-T24) |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Additional Feature | ADDRESS LATCHES |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT4514 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 4:16 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 16 |
| Propagation Delay | 83 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 83 ns |
| Family | HCT |
| Logic Function | Decoder, Demultiplexer, Demux, Latch |
| Number of Inputs | 4 |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 69 ns |
| Voltage Supply Source | Single Supply |
| Input Conditioning | LATCHED |
| Height | 4.57mm |
| Length | 31.75mm |
| Width | 13.71mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT4514E Overview
In order to conserve board space, digital switch is included in the 24-DIP (0.600, 15.24mm).Tube is the method used for packaging.In terms of mounting, digital switch ic uses the Through Hole method .The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74HCT series, these multiplexers have a wide range of applications.As part of its basic configuration, 24 terminations are designed as a part of it.The base part number is 74HCT4514, so you can find its logic switch related parts using that number.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 24 components that can be connected to each pin.Single is used as its supply type.This multiplexer ic has 24 pins configured.Multiplexer ics are mounted in the direction of Through Hole.The logic switch is a member of the HCT family.There are 16 bits in signal multiplexer.In order for 5V to operate normally, a power supply is provided.The turn signal switch has 16 outputs.This is an the digital switch ic that is classified as Decoder/Drivers.No external influence consumes 8μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.A multiplexer such as this has 4 inputs available.Furthermore, the characteristics of ADDRESS LATCHES have been improved.A configuration element for the mux switch consists of 1 elements.
CD74HCT4514E Features
Supplied in the 24-DIP (0.600, 15.24mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
ADDRESS LATCHES
CD74HCT4514E Applications
There are a lot of Texas Instruments CD74HCT4514E Signal Switches / Multiplexers / Decoders applications.
- Data communication
- Enabling block of memory depending on address in memory chips
- Recording transmission
- Time division multiplexing system
- Steel plants
- Speed control of medern motors
- HDMI applications
- Analog to digital conversion
- Automatic health monitoring systems
- High-performance memory systems
