CD74HCT4520MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 50MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 83 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 83 ns |
| Reset | Asynchronous |
| Family | HCT |
| Logic Function | Counter |
| Direction | Unidirectional |
| Trigger Type | POSITIVE EDGE |
| Sync/Async | Synchronous |
| fmax-Min | 17 MHz |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT4520MG4 Overview
In the SOICpackage, it is supplied. It is configured using 16terminations. Having a supply voltage of 5V enables to operate in a fully flexible manner. A wire connects the 2elements. All component pins are equal to 16. There are 16 pins going on to connect other parts in the circuit. It is mounted using the way of [0]. The HCTfamily includes it. There is information in the device in the form of 4bits. An important feature of this electronic device is [0]. In this device, the temperature grade is MILITARY. From the voltage source, there is a voltage of 5V volts. In order for it to operate, it requires a supply voltage of 5V . The electrical characteristics remain stable at maximum temperature 125°Cfor extended periods. Temperature ranges are specified, with -55°Cset as a lower limit. A frequency of 50MHzis used for operation. 5.5Vis the maximum voltage available to the device. It is possible to operate the device at as low a voltage as 4.5V. Quiescent current is consumed at 8μA.
CD74HCT4520MG4 Features
Embedded in the SOIC package
NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE
Operating supply voltage of 5V
Frequency of 50MHz
CD74HCT4520MG4 Applications
There are a lot of Texas Instruments CD74HCT4520MG4 Counters & Dividers applications.
- VHF, UHF, FM, AM, etc.
- Time Out Timer for Consumer-Application Industrial Controls
- LINEARIZATION
- Divide-by"N" counters/frequency synthesizers
- ALGEBRAIC COMPUTATION
- Fixed or Programmable Frequency Division
- SQUARE ROOT
- Time-delay circuits
- Fixed and programmable counters greater than 10
- Signal gating
