CD74HCT4520MT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 50MHz |
| Base Part Number | 74HCT4520 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 83 ns |
| Reset | Asynchronous |
| Family | HCT |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive, Negative |
| fmax-Min | 17 MHz |
| Count Rate | 25MHz |
| Timing | Synchronous |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CD74HCT4520MT Overview
In the 16-SOIC (0.154, 3.90mm Width)package, it is supplied. It is configured with 16terminations. 5Vis fully flexible due to its voltage supply. In this diagram, there are 2elements that are interconnected by wires. The number of all component pins is 16. In this case, it is packaged as Tape & Reel (TR). In the circuit, 16pins are used to connect other components. It is mounted using the way of [0]. It emerges as a member of HCT family. Having been designed as a member of the 74HCTseries, it is well suited for use in a wide range of applications. Logic type Binary Counter is adopted. The operating temperature should be set at -55°C~125°C. There is a mounting type of Surface Mounton this device. By providing the supply voltage of [0], it is capable of operating more reliably. Each element in the array stores 4 bits. The result may be yesin terms of Pbfree code. It is important to note that in regards to this electronic device, NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLEis an extremely significant feature. Under its base part number of [0], you will find additional related parts. The packing of the product is carried out by [0]. As a result of the voltage source, there is 5V voltage. To operate, it requires a supply voltage of [0]. It operates with the frequency of 50MHz.
CD74HCT4520MT Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE
Operating supply voltage of 5V
Frequency of 50MHz
CD74HCT4520MT Applications
There are a lot of Texas Instruments CD74HCT4520MT Counters & Dividers applications.
- Digital multiplexing and demultiplexing
- Frequency division
- Communications Digital Frequency Synthesizers;
- Fixed and programmable counters greater than 10
- Fixed or Programmable Frequency Division
- Programmable binary and decade
- Control counters
- Time-delay circuits
- Frequency dividers
- Up Counters
