CD74HCT534E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 50MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 53 ns |
| RoHS Status | Non-RoHS Compliant |
CD74HCT534E Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. D flip flop is embedded in the Tube package. It is configured with Tri-State, Invertedas an output. It is configured with the trigger Positive Edge. Through Holeis occupied by this electronic component. The JK flip flop operates at a voltage of 4.5V~5.5V. It is operating at a temperature of -55°C~125°C TA. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. In order for it to function properly, its output frequency should not exceed 50MHz. A total of 1elements are present in it. As a result, it consumes 8μA of quiescent current without being affected by external factors. Currently, there are 20 terminations. An input voltage of 5Vpowers the D latch. A 10pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the HCTfamily of devices. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 4.5V. This flip flop has a total of 2ports.
CD74HCT534E Features
Tube package
74HCT series
CD74HCT534E Applications
There are a lot of Rochester Electronics, LLC CD74HCT534E Flip Flops applications.
- Asynchronous counter
- Set-reset capability
- Latch-up performance
- Counters
- Reduced system switching noise
- Event Detectors
- Bounce elimination switch
- Data Synchronizers
- Modulo – n – counter
- Communications
