CD74HCT564M
| Parameters | |
|---|---|
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT564 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Clock Frequency | 50MHz |
| Propagation Delay | 35 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 15pF |
| Prop. Delay@Nom-Sup | 44 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
CD74HCT564M Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. As part of the package Tube, it is embedded. It is configured with Tri-State, Invertedas an output. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -55°C~125°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74HCTseries of FPGAs. Its output frequency should not exceed 50MHz Hz. D latch consists of 1 elements. Terminations are 20. This D latch belongs to the family of 74HCT564. Power is supplied from a voltage of 5V volts. Input capacitance of this device is 10pF farads. Devices in the HCTfamily are electronic devices. In this case, the electronic component is mounted in the way of Surface Mount. This board is designed with 20pins on it. A Positive Edgeclock edge trigger is used in this device. This device has the base part number FF/Latches. An electronic part with 8bits has been designed. Its flexibility is enhanced by 8 circuits. The system runs on a power supply of 5V watts. There are 2 ports embedded in the flip flops. In order to achieve high efficiency, the supply voltage should be maintained at 5V. With a current output of 6mA , it offers maximum design flexibility. It is designed with 3 output lines. 8μAquiescent current consumed.
CD74HCT564M Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
CD74HCT564M Applications
There are a lot of Texas Instruments CD74HCT564M Flip Flops applications.
- Individual Asynchronous Resets
- Control circuits
- Circuit Design
- Computing
- Latch
- Power down protection
- Differential Individual
- Digital electronics systems
- Latch-up performance
- Reduced system switching noise
