CD74HCT564MG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT564 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 50MHz |
| Propagation Delay | 35 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 44 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Input Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT564MG4 Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. The Tubepackage contains it. Currently, the output is configured to use Tri-State, Inverted. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at -55°C~125°C TA. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74HCT series. You should not exceed 50MHzin its output frequency. A total of 1elements are present in it. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74HCT564. The power supply voltage is 5V. Its input capacitance is 10pFfarads. The electronic device belongs to the HCTfamily. It is mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. It is designed with a number of bits of 8. A total of 5V power supplies are needed to run it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. This input has 8lines. It consumes 8μA current.
CD74HCT564MG4 Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
CD74HCT564MG4 Applications
There are a lot of Texas Instruments CD74HCT564MG4 Flip Flops applications.
- Set-reset capability
- Parallel data storage
- Data Synchronizers
- Dynamic threshold performance
- Consumer
- Individual Asynchronous Resets
- CMOS Process
- Convert a momentary switch to a toggle switch
- Reduced system switching noise
- Patented noise
