banner_page

CD74HCT573E

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT573 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74HCT573E
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 285
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT573 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Gold
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Weight 1.1991g
Operating Temperature -55°C~125°C
Packaging Tube
Series 74HCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number 74HCT573
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 6mA
Number of Bits 8
Propagation Delay 35 ns
Quiescent Current 8μA
Turn On Delay Time 35 ns
Family HCT
Logic Function D-Type, Latch
Current - Output High, Low 6mA 6mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.006 A
Number of Gates 8
Control Type ENABLE LOW/HIGH
Independent Circuits 1
Number of Output Lines 3
Count Direction UNIDIRECTIONAL
Translation N/A
Height 5.08mm
Length 24.33mm
Width 6.35mm
Thickness 4.57mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74HCT573E Overview


In the 20-DIP (0.300, 7.62mm) package, it is embedded. Packaged in the way of Tube. In its configuration, Tri-State is used as the output. This electrical device has the logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Through Hole. The supply voltage of the device is 4.5V~5.5V. It is -55°C~125°C at the operating temperature. In the 74HCT series, this FPGA is located. 8 Bits are used in the design of this electronic part. This device has been designed with 20 terminations available. It is a member of the 74HCT573 family. The supply voltage of the device is 5V. 20 pins are provided. This electronic device belongs to the family of HCT. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted using the Through Hole method. As far as ports are concerned, this device has 2 ports. This part can be found within the FF/Latches subcategory. A total of 5V power supplies are needed to run it. The output current of 6mA makes it feature maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. 3 output lines generate the binary equivalent of the input lines. It consumes 8μA of quiescent current without being affected by outside factors.

CD74HCT573E Features


20-DIP (0.300, 7.62mm) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
5V power supplies

CD74HCT573E Applications


There are a lot of Texas Instruments CD74HCT573E Latches applications.

  • Serial Output Register
  • Watches
  • General-Purpose Register
  • Data acquisition
  • Counter timers
  • Shift Registers
  • A/D and D/A conversion
  • Shift left with parallel loading
  • Hammer
  • Control circuits

Write a review

Note: HTML is not translated!
    Bad           Good