CD74HCT573M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 360μA |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 35 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 35 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Number of Gates | 8 |
| Prop. Delay@Nom-Sup | 53 ns |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 9 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT573M Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. A package of Tube has been used. Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. There is no supply voltage for this device. A temperature of -55°C~125°C is used for operation. An FPGA of this type belongs to the 74HCT series. With this electronic part, there are 8 bits. This device is designed with 20 terminations. As a member of the 74HCT573 family, it falls under that category. The supply voltage of the device is 5V. 20 pins are available on it. It is a member of the HCT family of electronic devices. The pin configuration of the device is 20. The electronic part is mounted in a way that corresponds to Surface Mount. This device is equipped with 2 ports. There is a subcategory of FF/Latches for this part. There are 5V power supplies required for this machine to operate. It consists of 9 input lines from which an electronic circuit can be built. Due to its 6mA output current, it offers maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. Aquiescent current is consumed by 8μA without being affected by external forces. There are also characteristics of BROADSIDE VERSION OF 373 associated with it.
CD74HCT573M Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
5V power supplies
CD74HCT573M Applications
There are a lot of Texas Instruments CD74HCT573M Latches applications.
- Multi-line decoders
- Up/down difference counting
- Network Switches
- Automatic test equipment
- Counters
- Buffer Storage
- Serial Output Data Queuing
- Parallel Input
- Parallel Input
- Address register
