banner_page

CD74HCT573M96G4

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT573 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74HCT573M96G4
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 340
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT573 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Series 74HCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74HCT573
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 6mA
Number of Bits 8
Propagation Delay 53 ns
Quiescent Current 8μA
Turn On Delay Time 35 ns
Family HCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 6mA 6mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.006 A
Control Type ENABLE LOW/HIGH
Number of Output Lines 8
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74HCT573M96G4 Overview


In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the way in which it is packaged. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Surface Mount, this electronic part is mounted. The supply voltage of the device is 4.5V~5.5V. It is -55°C~125°C at the operating temperature. It is a type of FPGA belonging to the 74HCT series. An electronic part with 8 bits is designed. In this device, there are 20 terminations. As a member of the 74HCT573 family, it falls under that category. The device is operated when the supply voltage is set to 5V. It is equipped with 20 pin count. This electronic device is categorized as a HCT electronic device. This board has 20 pins on it, which is what it is designed for. Surface Mount is the method used for mounting this electronic part. This device has a total of 2 ports. This part is included in FF/Latches. There are 5V power supplies required for this machine to operate. On the basis of its reliability, this device is well suited for TR. With 6mA, maximum design flexibility is ensured. A high efficiency supply voltage should be maintained at 5V. There are 8 output lines that correspond to the binary equivalents of the input line. The quiescent current consumed by it is 8μA because it is unaffected by external factors. A total of 1 elements are contained in it.

CD74HCT573M96G4 Features


20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
5V power supplies
1 elements

CD74HCT573M96G4 Applications


There are a lot of Texas Instruments CD74HCT573M96G4 Latches applications.

  • Programmable binary
  • Ring counter
  • Stacked or Push-Down Registers
  • Decade counting
  • Multi-line decoders
  • Parallel data storage
  • Counters
  • General-Purpose Register
  • OC-48 communication systems
  • Hammer Device Information

Write a review

Note: HTML is not translated!
    Bad           Good