CD74HCT574M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 60MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 50 ns |
| RoHS Status | Non-RoHS Compliant |
CD74HCT574M Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. In the configuration, Tri-State, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is operating at a temperature of -55°C~125°C TA. This D latch has the type D-Type. JK flip flop is a part of the 74HCTseries of FPGAs. A frequency of 60MHzshould not be exceeded by its output. The list contains 1 elements. It consumes 8μA of quiescent It has been determined that there have been 20 terminations. The power source is powered by 5V. JK flip flop input capacitance is 10pF farads. The electronic device belongs to the HCTfamily. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 4.5V. The flip flop has 2ports embedded within it. Furthermore, it has BROADSIDE VERSION OF 374as a characteristic.
CD74HCT574M Features
Tube package
74HCT series
CD74HCT574M Applications
There are a lot of Rochester Electronics, LLC CD74HCT574M Flip Flops applications.
- Patented noise
- Balanced 24 mA output drivers
- Computing
- Set-reset capability
- Clock pulse
- Asynchronous counter
- Buffered Clock
- Memory
- Bus hold
- ESD performance
