CD74HCT574M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 33 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 15ns @ 5V, 15pF |
| Prop. Delay@Nom-Sup | 50 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT574M96 Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). The package Cut Tape (CT)contains it. This output is configured with Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74HCTseries of FPGAs. A frequency of 60MHzshould be the maximum output frequency. In total, it contains 1 elements. A total of 20terminations have been recorded. The 74HCT574 family contains it. Power is provided by a 5V supply. The input capacitance of this JK flip flopis 10pF farads. Devices in the HCTfamily are electronic devices. The electronic part is mounted in the way of Surface Mount. 20pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. It is designed with 8bits. To achieve this superior flexibility, 8 circuits are used. In view of its reliability, this D flip flop is a good fit for TR. The system runs on a power supply of 5V watts. The D flip flop is embedded with 2ports. For high efficiency, the supply voltage should be set to 5V. In order to operate, the chip has 3 output lines. In terms of quiescent current, it consumes 8μA .
CD74HCT574M96 Features
Cut Tape (CT) package
74HCT series
20 pins
8 Bits
5V power supplies
CD74HCT574M96 Applications
There are a lot of Texas Instruments CD74HCT574M96 Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Data transfer
- Individual Asynchronous Resets
- Differential Individual
- Modulo – n – counter
- Shift Registers
- ESD performance
- Data storage
- Matched Rise and Fall
- Storage registers
